Scientific Program

Keynote Speakers

 

Dr. Masahiro YOSHIMURA

Distinguished Chair Professor &Director,Promotion Center for Global Materials Research, Dept of Mater.,Sci. and Eng., National Cheng Kung University,Taiwan

Title: Importance of Soft Processing(=Low-Energy Production) of Advanced Inorganic Materials for Sustainable Society

 
 

Dr. Der-Jang Liaw

National Taiwan University of Science and Technology, Taiwan

Title: Advanced Polymeric Nanomaterials: Synthesis, Optoelectronic Properties, Highly Selective Dispersion of SWCNTs and Solar Cell Applications

 
 

Dr. Marvin Caruthers

University of Colorado, USA

Title: Synthesis and Chemical Reactivities of Boranephosphonate DNA Microarrays/Carbon Nanotubes

 
 

Dr. Ray T. Chen

The University of Texas, USA

Title: Silicon Nanophotonic Devices for Interconnects, Computing and Sensing

 
 

Dr. Sudipta Seal

University of Central Florida, USA

Title: Wonders of nanoceria biology

 
 

Dr. Manoj Gupta

National University of Singapore, Singapore

Title: Magnesium (Composite) Technology for Welfare of Humans and Mother Earth

 
 

Dr. Khashayar Ghandi

Mount Allison University, Canada

Title: Revolution in health and energy by nanomaterial

 
 

Dr. Shinji Kohara

National Institute for Materials Science, Japan

Title: Synchrotron x-ray scattering measurements of functional disordered materials

 
 

Dr. Michitaka Ohtaki

Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, Japan

Title: Oxide Thermoelectric Materials for Waste Heat Energy Recuperation

 
 

Dr. Tatsuo Hasegawa

The University of Tokyo/ AIST, Japan

Title: Materials and Nanoscience for Advanced Printed Electronics

 
 

Dr. Jun-ichi Kadokawa

Kagoshima University, Japan

Title: Preparation of Polysaccharide Supramolecular Materials through Enzymatic Polymerization

 
 

Dr. Aswini Ghosh

Indian Association for the Cultivation of Science, India

Title: Dynamics and Relaxation of Charge Carriers in Ionic Conductors

 
Advances in NanoMaterials Science

Session Introduction

 

Lung-Chien Chen

National Taipei University of Technology, Taiwan

Title: Low-temperature deposited ITO-free AZO/Ag/AZO used as transparent electrodes of organic polymer solar cell

 
 

Yongmei Zheng

Beihang University, China

Title: Bio-inspired wettability surfaces with multi-gradients to control water collection/repellency

 
 

Omer Nur

Linkoping University, Sweden

Title: Zinc Oxide Nanorods for Low Frequency Electrical Energy Harvesters and Sensors Systems

 
 

Wei-Song Hung

Chung Yuan University, Taiwan

Title: Graphene oxide composite membranes for pervaporation

 
 

Kaviyarasu Kasinathan

iThemba LABS, South Africa

Title: Quantum confinement of well-aligned NiO nanorods by sol-gel method

 
 

Dong Ha Kim

Ewha Womans University, Republic of Korea

Title: Pioneering Plasmonics for Versatile Applications

 
 

Dr. KAUSHIK PAL

Wuhan University, China

Title: Nanomaterials Assembled Liquid Crystals Switching Device

 
 

Antonio Cammarata

Czech Technical University in Prague, Czech Republic

Title: Ab Initio Electro-Structural Strategies for Atomic Scale Materials Design

 
 

M. Angelica del Valle

Pontificia Universidad Catolica de Chile, Santiago-Chile

Title: Electrochemistry: invaluable tools to synthesize characterize and/or apply conducting polymers

 
 

Wenli Deng

South China University of Technology, China

Title: Bioinspired fabrication in micro/nano-scale and molecular self-assembly of synthesized compounds

 
 

Lei Shao

Chalmers University of Technology, Sweden

Title: Light speeds up nanorod motors

 
 

Yogendra Kumar Mishra

University of Kiel, Germany

Title: Flame grown ZnO tetrapods for multifunctional applications: From antiviral agents to growth of hybrid 3D flexible networks

 
 

Mohammad Hussain.K. Rabinal

Karnatak University, India

Title: New Generation Thermoelectric Materials Based on Nanostructured Semiconductors

 
 

Dr. M. Bilal

COmsats Institute Of Information Technology, Pakistan

Title:

 
Materials Science & Engineering
Big data in Materials Science

Session Introduction

 

M. Sherif El-Eskandarany

Kuwait Institute for Scientific Research, Kuwait

Title: Amorphous-nanocrystalline-amorphous cyclic phase transformations on Zr-based metallic glassy systems

 
 

Khandaker M. A. Hossain

Ryerson University, Canada

Title: Performance of new generation of engineered concrete materials in infrastructure applications

 
 

Osman Adiguzel

Firat University, Turkey

Title: Thermo-mechanical Behaviour and Structural Characterization of Shape Memory Alloys

 
 

Jianguo Lin

Imperial College London, London

Title: A new high-strength aluminium processing technology for manufacturing lightweight complex-shaped panel components

 
 

Dr. Feng Shi

Beijing University of Chemical Technology, China

Title: Construction of 3D Ordered Structures Through Macroscopic Supramolecular Assembly toward Applications in Scaffolds

 
 

Jingliang Li

Deakin University,Australia

Title: Engineering the supramolecular assembly of molecular gelators by controlling nucleation

 
 

Andrei Victor SANDU

Gheorghe Asachi Technical University of Iasi, Romania

Title: PHOSPHATE LAYERS – A CHEAP AND MULTIPURPOSE COATING

 
 

D.A Brennan

Swansea University, UK

Title: OPTIMISATION OF THE NEAR INFRARED CURING OF ORGANIC POLYESTER COATINGS DURING PRE-PAINTED STEEL PRODUCTION USING COMPUTATIONAL MODELLING

 
 

Yongfeng Shen

Northeastern university, China

Title: Nanoscale plate-shaped precipitates strengthened Lanthanum-bearing Mg-3Sn-1Mn alloys through continuous rheo-rolling

 
 

Shehdeh M. Ghannam

Zarqa University, Jordan

Title: COMPARISON OF PRECAST CONSTRUCTIONS IN DEVELOPED AND DEVELOPING COUNTRIES

 
 

Asghari Maqsood

Air University,Pakistan

Title: Fabrication and physical characterization of Co1-x ZnxO4 nanoferrites

 
 

Dieter M. Herlach

DLR, German aerospace Center, Germany

Title: Solidification of metastable materials from containerless undercooled melts

 
 

Dr. Gyorgy Szekely

School of Chemical Engineering & Analytical Science, The University of Manchester, UK

Title: Imprinted Materials for Sustainable Separation Engineering

 
 

J. Manjanna

Rani Channamma University, India

Title: The physico-chemical consequences of austenitic to martensitic phase transformation in stainless steels

 
 

Bahareh Yazdani

University of Exeter, United Kingdom

Title: New approach to produce highly dispersedgraphene oxide-carbonnanotube hybridreinforcement into aluminamatrix

 
 

Sami Elhag

Linkoping University, Sweden

Title: Surfactant-assisted aqueous chemical synthesis of metal oxide nanostructures and its influence on sensing properties

 
 

Dr. Ahlem Lebbad

Universite Ferhat Abbas Setif, ALGERIA

Title: Annealing effect on structural and electrical properties of Al-doped ZnO thin films prepared by sol gel method

 
 

Dr. Adnan Jahangir

COMSATS, Institute of Information Technology, Pakistan

Title:

 
 

Mrs. Rabia Ilyas Butt

Riphah International University, Pakistan

Title: On the exact solution of Unsteady MHD Rotating Oscillatory Flow of viscous fluid in a Porous medium with Thermal Radiation

 
Emerging Areas of Materials Science

Session Introduction

 

Dr. Michel A. Van Hove

Hong Kong Baptist University, Hong Kong

Title: MECHANISMS OF MOLECULAR MACHINES

 
 

Marcus C. Newton

University of Southampton, UK

Title:

 
 

Neetu Goel

Panjab University, India

Title: Density functional study of interaction between amino acids and graphene/ and BN sheet in gas and aqueous phase including empirical DFT Dispersion correction

 
 

Marina N. Popova

Institute of Spectroscopy, Russian Academy of Sciences, Russia

Title: Materials for optical quantum memory: spectroscopic studies

 
 

Dr. Ahmad Reza Rastkar

Shahid Beheshti University, Iran

Title: GLOW DISCHARGE PLASMA BRAZING OF TI-45AL-2NB-2MN-1B WITH AL-SI AND TI-NI-CU FILLER METAL

 
Composite Materials

Session Introduction

 

Stevulova Nadezda

Technical University of Kosice, Slovak Republic

Title: Sustainable lightweight composites based on hemp hurds

 
 

Weijie Lu

Shanghai Jiao Tong University, China

Title: Microstructure and mechanical properties of in situ synthesized titanium matrix composites

 
 

Tingting Zhang

Dalian University of Technology, China

Title: CORROSION OF NUCLEAR METAL WASTES ENCAPSULATED IN MAGNESIUM SILICATE HYDRATE (MSH) CEMENT

 
 

Stefano Caporali

INSTM-University of Firenze, Italy

Title: ELECTRODEPOSITION OF ALUMINIUM/CERAMIC METAL MATRIX COMPOSITE COATINGS FROM IONIC LIQUID

 
 

Dr. Revanasiddappa M

PESIT-Bangalore South Campus, India

Title: Synthesis Characterization and Mechanical Properties of Fly ash Nano clay Epoxy Composites

 
Carbon Nanomaterials

Session Introduction

 

Dr. Tomokazu Umeyama

Kyoto University, Japan

Title: Single-Walled Carbon Nanotubes as Scaffold of Photofunctional Molecules

 
 

Dr. K. J. Sankaran

Hasselt University, Belgium

Title: Development of diamond-based hybrid materials for electron field emitters and microplasma cathode application

 
 

Dr. A.Abdelghani

INSAT, Tunisia

Title: Properties of MHDA-Functionalized Multiwall Carbon Nanotubes for Chemical Vapors Sensing

 
 

Dr. Yanbiao Liu

National University of Singapore, Singapore

Title: Electro-active Filter Technology for Environmental Applications

 
 

Dr. Alex T Kuvarega

University of South Africa, South Africa

Title: Carbon nanotube/co-doped TiO2 nanocomposites for photocatalytic water decontamination

 
 

Dr. Marina Popova

Institute of Spectroscopy, Russian Academy of Sciences, Russian Federation

Title: Germanium–vacancy color center in isotopically enriched diamonds synthesized at high pressures

 
 

Dr. Cheng Han

National University of Defense Technology, China

Title: Modification of hierarchically porous SiC ultrafine fibers with tunable nitrogen-containing surface

 
 

Ms. Alina Terechshenko

Nazarbayev University, Kazakhstan

Title: Adsorption properties of DOX antibiotic from aqueous solutions onto pristine and magnetized carbon nanotubes