LNEC – Laboratorio Nacional de Engenharia Civil Portugal
Teresa Leonor Ribeiro Cardoso Martins Morgado is ph. D in Mechanical Engineering by Instituto Superior Técnico of Lisbon University, Master in Mechanical Engineering option of Materials and Manufacturing Processes by Faculty of Engineering of the O ́Porto University. Teresa, holds Associate Professor Public Examinations in the scientific area of Production Technology and Construction of Mechanical Engineering Department of Polytechnic Institute of Tomar. Currently, consolidate her position as researcher in the Scientific Instrumentation Centre of the R&D institute calls LNEC (by mobility inter career) with Associate Professor on Engineering Departmental Unit of Tomar Polytechnic Institute (IPT) and member of the UNIDEMI/ FCTUNL - Research and Development Unit for Mechanical and Industrial Engineering/ Faculty of Science and Technology - Universidade NOVA de Lisboa. Since 2017 Teresa is researcher in UNIDEMI – FCT/UNL. During 2016 until the end of 2018 Teresa consolidate her position in IPT with Professor in the Faculty of Science and Technology of Universidade NOVA de Lisboa. From 2014 until 2016, Teresa was President of Forum and Researcher at CeFEMA/UL - Center of Physics and Engineering of Advanced Materials of IST/UL - Instituto Superior Técnico of Lisbon University. She was Research Member at ICEMS/UL – Institute of Materials and Surface Science and Engineering/ University of Lisbon since 2001 until 2014. In IST collaborated as researcher for twenty years. Teresa is author and co-author of dozens of scientific publications and Technical Consulting reports; and guided dozens of jobs in industry internships like foundries, food industry, automotive industry, railway industry, hospitals, metalworking industry, paper industry, industrial moulds and injection plastic materials industry. Throughout her career, she has been organizer at international conferences as Member of the Local Organizing Committees, Member of Advisory Committees and Member of the International Scientific Committees. 2/2 Lisbon, 3 rd of October of 2019 Teresa Morgado is member of several editorial boards and is permanent member of several societies as Order of Engineers (OE), Materials Portuguese Association (SPM), Portuguese Society for Experimental Analysis of Stress (APAET), European Structural Integrity Society (ESIS) and Ibero-American Federation of Mechanical Engineering (FeIbIm/FelbEm), ATTCEI (Portuguese Association of Knowledge and Technology Transfer). Researching since September 1995 and teaching since October 1993, has taken different positions like Member of Engineering Departmental Unit Council, Member of the Technical Scientific Councils of Research Centers (CIC-LNEC, LNEC, UNIDEMI-FCT/UNL, CeFEMA-IST-UL, ICEMS-IST-UL), Member of the Technical Scientific Council of Technology School of Abrantes, Member of the Commission for Evaluation and Accreditation of Mechanical Engineering course, Internship Nucleus Member of the Mechanical Engineering course, Council Member of Mechanical Engineering Department, Member of the Scientific Council Plenary, Pedagogical Coordinator of Mechanical Engineering course, Representative Member of Mechanical Engineering Department Associate Professors at the Pedagogical Council.
QRACE-Quantum Research And Centre of Excellence India
QRACE-Quantum Research And Centre of Excellence India
Dr. Kumar Gautam is Founder & CEO of Quantum Research And Centre of Excellence (QRACE) and has experienced as Associate Professor with a demonstrated history of working in the higher education industry. Skilled in Matlab, Quantum computation, Python, Algorithms, and Research. QRACE is an independent incubation centre with a decentralized community of researchers and scientists with noble ideas and global mindsets on a common path to change the way of societal applications. Strong education professional with a Doctor of Philosophy - Ph.D. focused on Quantum gate design based on Schrödinger Dynamics from the University of Delhi, India. He is also an Editor-in-chief of Research Journal of Quantum Computations and Physical Systems (RJQCPS) along with esteemed reviewer of Quantum information processing, Springer and has published good number of Research papers in the field of quantum computation, those paper are SCI Paper in the quantum information processing, Springer and conference paper on quantum gate design. His research is always connected with a young mind and also serve as chief research officer of Edumonk foundation (NGO). He is an affiliate member of the Royal Society of Chemistry, member of IEEE, a Lifetime member of VIBHA and IETE. He received “Excellent Researcher Award” Global Education and Corporate Leadership Awards (GECL-2018) GECL Awards By LWT, India will be held on December 23, 2018. He has submitted various projects in DST, AICTE and TEQIP, which is, Indo-Russian DST project and Indo-Egypt DST project, etc. Track Editor of International Conference on "pattern recognition techniques (ICPR'17)" from 22nd to 23rd December 2017. Session Chair of International Conference on "pattern recognition techniques (ICPR'17)" from 22nd to 23rd December 2017. Convener of International Conference on “Smart Technologies in the Field of Engineering, Management and Sciences”, January 11-12, 2018. Session Chair of 6th International Conference on Signal Processing and Integrated Networks (SPIN 2019), ECE dept. Amity University, 7-8 March 2019. He had an invited Speaker in International Conference on Quantum Physics and Nuclear Engineering during March 22-24, 2016 in London, UK. Recently, invited as Keynote Speaker for Applied Physics 2019 Congress in"3rd International Conference on Applied Physics and Mathematics" (Applied Physics 2019) during July 29 -30, 2019 at Bangkok, Thailand. Another, as an invited talk in the Fifth International Conference on Polymer Processing and Characterization (ICPPC – 2019) to be held from 11-13 October 2019 at Mahatma Gandhi University, Kottayam, Kerala, India. His aim is to bring together exceptional minds from around the world to build something extraordinary.
Ricardo Branco has completed his PhD degree in Mechanical Engineering from the University of Coimbra. He is currently Professor at the Department of Mechanical Engineering of the University of Coimbra, Portugal. Research Interest Structural integrity, mechanical behaviour of materials, fatigue and fracture of engineering materials, fatigue analysis of mechanical and structural notched components, application of finite element method to fracture mechanics.
Luís Guerra ROSA is Associate Professor with Aggregation at Instituto Superior Tecnico (IST Lisbon), Universidade de Lisboa. Main URL: https://fenix.ist.utl.pt/homepage/ist11630 He concluded his graduation in Metallurgical Engineering in 1977; got a Doctor degree in Mechanical Engineering in 1986; and the title of “Agregado” in Materials Science in 2004. Head of Dept. of Materials Sci. & Engng. at IST Lisbon during the periods 1998-2000 and 2004-2008; he also served as Director at INETI´s Dept. of Materials (Lisbon) in 1993-1995. Presently, he is the representative of IST-ID in the European Union H2020-LCE-2016-ERA initiative “Integrating National Research Agendas on Solar Heat for Industrial Processes (INSHIP)” and coordinator of a research group working on materials processing and intelligible usage of solar heat for industrial processes.
Mexican Professor at the University of Science and Technology Beijing (USTB), School of
Metallurgical and Ecological Engineering, since September 2018, currently rated number
one metallurgy department in the world.
His academic background and research activities have been focused on ferrous
metallurgy, in particular application of thermodynamics and kinetics of gas-solid reactions,
kinetics of steel refining in the ladle furnace, physical modeling of bottom stirring in
metallurgical ladles, slag foaming in the EAF, mathematical modeling of DRI melting in the
EAF, etc.. Professor Conejo has worked pretty close with the steel industry in Mexico for
more than 20 years.
He has published 50 technical articles in peer-reviewed journals of high impact factor.
Professor Conejo has received several national and international awards for his work on
slag foaming in the EAF, support to the steel industry and mathematical modeling of the
EAF involving DRI melting.
Currently he is conducting research work on physical and mathematical modeling of gas
injection in metallurgical reactors.
Since 1981, Full Professor at Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University, Prague. From 1973 till 1992 Head of the Department. From 1985 till 1990 Dean of Faculty of Mathematics and Physics, Charles University. His research activities are mainly investigation of solid solution hardening, plastic instabilities and dynamic strain ageing, mechanical properties of magnesium polycrystals, composites and nanomaterials, hardening and softening mechanisms, superplasticity, and thermally activated mechanisms, thermally properties of magnesium alloys and composites. He is author and co-author of more than 500 scientific papers published mostly in international journals with IF and reviewed conference proceedings. During the last ten years, he presented 22 invited lectures and he has been or is a member of scientific international committees of 21 international conferences (at 2 conferences he served as a chairman) His published papers are oft cited by other authors – more than 3000 citations. He was co-editor of journal “Acta Universitatis Carolinae”. He is co-author of 10 books. He has received Award of Minister of Education – First Prize in 1994 for the best text book for university students.
Dr Qiang Xu is an academic staff at Huddersifeld University, UK. Specialist in the creep damage mechanics particularly in the development of creep damage constitutive equations. He has given a number of key notes speeches and served as committee members at international conferences.
After completing his degree in Physics at the University of Pisa and PhD in Materials Engineering at the University of Napoli, Andrea Di Schino joined Centro Sviluppo Materiali SpA (CSM), a european leading centre for Materials Research. After spending more than 10 years in CSM he joined the University of Perugia as Professor of Metallurgy. His main interest is to combine fundamental theoretical research and experiments to explain mechanisms and discover new insight in the field of steel metallurgy. Author of more than 200 papers relating to physical metallurgy and product development, he is member of the Editorial Board od several Journals (Acta Metallurgica Slovaca, Metalugija, Journal of Chemical Technology and Metallurgy, Journal of Materials and Environmental Science, SciFed Journal of Metallurgical Science, Materials Research India).
Prof. Prasad Yarlagadda worked in industry and university over 30 years. He is currently Professor in Smart Systems and Project Director: Airports of the Future Research in in Queensland University of Technology, Australia. He had number of distinguished appointments in various universities in India, China and Australia. He received more than $15M funding for his research and he published 500 papers. In 2016 Professor Yarlagadda was awarded Order of Australia Medal and included in Queens Birthday Honors list in recognition of his outstanding service to Engineering Profession and Indian Community in Queensland, Australia. He is Editor in Chief and Deputy Editor-in-chief of 4 international journals, and also editorial board member of 18 ISI listed Journals. IN addition he is also held number of leadership roles in Professional societies as President, Society of Manufacturing Engineers and Fellow of many professional organizations such as Engineers Australia, World Academy of Manufacturing and Materials ASME, SME and community leadership positions such as Chairman, GOPIO Science and Technology Council, President, Federation of Indian Communities of Queensland are among others.
Dr. Sherif D. El Wakil is an Emeritus Professor of Mechanical Engineering at the University of Massachusetts Dartmouth where he held the rank of Chancellor Professor of Mechanical Engineering. Dr. Elwakil currently serves as aconsultantfor product failure analysis and product design assessmentand as a technical expert witness before courts.
Dr. El Wakil has over 40 years of experience in academia, teaching various manufacturing engineering courses at both the undergraduate and graduate levels. He also served in various administrative functions, including Dean, Chairman of the Academic Council of the College of Engineering, and Chairman of the Mechanical Engineering Department. Dr. El Wakil has implemented multiple programs at the undergraduate and graduate levels and oversaw their ascendency to national ranking. Dr. El Wakil is the author of "Processes and Design for Manufacturing" which has been translated into multiple languages and adopted at many of the world's top engineering programs. He received many research grants from NSF, NIST, SME, and was awarded the USAF Fellowship.
Dr. El Wakil provided consulting work for numerous national and international manufacturing corporations, and served as an expert witness before courts. He has been a member of the Society of Manufacturing Engineers (SME) since 1984, and waselected amember of the North American Manufacturing Research Institute (NAMRI) in the same year. He also served as a member and chair of the Curriculum Committee of the SME Education Foundation. His professional excellence and consistent contributions tothe activities of the SME have been acknowledged with the President's Award twice, in 1985 and 2006. Finally, he became a life-long member of SME in 2015.
Maurício Leonardo Torem is a metallurgical and industrial engineer (1977) – PUC-Rio. He undertook his master degree in metallurgical engineering (1980) at the Pontifical Catholic University of Rio de Janeiro (PUC-Rio) and his doctorate degree in metallurgical engineering/ mineral processing at the Federal University of Rio de Janeiro (UFRJ) (1989). He works with the Department of ChemicalEngineering and Materials– Pontifical Catholic University since 1983. He is the Head of the Mineral Processing Research Group. His main research areas are: Environmental and Mineral Biotechnology applied to metals uptake from liquid streams and mineral flotation and more recently, urban mining. He has published many articles in scientific journals and in conferences.
Associate Professor, Dr Willie Nheta. Graduated from Moscow Institute of Steel and Alloys. Senior Researcher at University of Johannesburg, South Africa. Research interests in Mineral Processing and hydrometallurgy.
Prof G L Sharma is a seasoned engineer and academician with 32+ years of cumulative experience in the Industry as well as academic. He is an alumni of IIT Bombay. Presently he is Director, School of Automobile, Mechanical and Mechatronics Engineering at Manipal University Jaipur and also holds responsibility of Industry Connect.Hehas good mix of experience in Industry (21years) and Academia (11). Prior to joining Academia in 2012, he served in the Indian Navy as practicing Marine Engineer and commissioned officer from 1985 -2012. He took premature retirement to pursue his passion in the field of education to transform the younger generation towards responsible global leaders.He has been instrumental in setting up three new universities in the leadership position. He accumulated extensive hands on experience in all major technologies while serving onboard ships and submarines built in US, France, Germany, Russia, UK and India. He has worked in the different capacities onboard ships as Chief Engineer, Controller Material Planning, Equipment Health Monitoring and Machinery Certification Authority, Marine Engineering Trainer, Curriculum designer, Policy Maker and Production Manager etc. His significant on board warships appointments for 12 years include INS Vikrant, INS Viraat, INS Taragiri and INS Shakti. Dr. GL Sharma belongs to that rare breed Engineering professionals who has all throughout his career was concurrently, yet actively, involved with Academia. He was the Founder Director of Four School and founder member of Amity University Kolkata, Founder Director and Dean Engineering of JECRC University Jaipur. He is fellow of Institution of Engineers, Fellow of Marine Engineers Institutionand life member of Condition Monitoring Society of India. He received his B. Tech (Mechanical) from Naval College of Engineering, Pune, and M. Tech (Systems & Control Engineering) from IIT Bombay and Ph D from IIT Bombay. He also hold Bachelor’s degree in Humanities and Masters in Human resource Management. He has more than 45 publications and has won the awards of best theory paper (1998) and best technical paper (2012). He has also undertaken various project during his long spanned engineering career. His area of Interest include Machinery Health Monitoring, Automation and Control Engineering.
Dr. Tingkai Zhao is currently working as a full professor in School of Materials Science
and Engineering of Northwestern Polytechnical University (NPU) and has accomplished
his PhD degree from Xi’an Jiaotong University (XJTU) in 2005, China. He has visited
Northwestern University (Evanston, USA) and University of Oxford (Oxford, UK) as a
visiting scholar. As a director of NPU-NCP Joint International Research Center on
Advanced Nanomaterials & Defects Engineering, the vice-director of Shaanxi Engineering
Laboratory for Graphene New Carbon Materials & Applications. His research group mainly
investigates the synthesis, structure and performance of advanced carbon materials such
as carbon nanotubes (especially amorphous carbon nanotubes), graphene, flexible
graphite, 2D nanomaterials, MXene and their applications in composites, energy
conversion (solar cell, supercapacitor and Li-ion batteries), smart device and biosensors.
He has published 2 kooks, 13 Chinese Invention patents and more than 100 academic
articles on SCI journals, and also obtained more than 25 Awards and Honors such as the
first prize of Shaanxi Science and Technology Awards in 2013 etc., and 4 times scientific
reports in《China Science Daily》 newspapers for his research achievements. And he has
also been elected as a commissioner of Xi’an Nanoscience & Technology Society.
Ezddin Hutli has completed his PhD from Belgrade University â€“ Faculty of Mechanical Engineering, Belgrade-Serbia and postdoctoral studies from Ek-MTA, Hungary. He has published more than 40 papers in reputed journals and international conferences and has been invited as keynote speaker in international conferences.
Dr Beata Smyrak Associate Professor in 2006 has finished PhD studies in AGH University of Science and Technology - Faculty of Non-Ferrous Metals in Krakow Poland. She she obtained a doctoral degree - specialty in materials science and metal forming. In 2014 she got the degree of habilitated doctor in the field of technical sciences. Since 2016 she has been employed as an associate professor at the AGH -University of Science and Technology - Faculty of Non-Ferrous Metals. Actually she has a Vice-Dean for Development and Cooperation of the Faculty of Non-Ferrous Metals, AGH University of Science and Technology, Krakow, Poland. She is membership of WAI, TMS and DGM. She is co-author of about 70 publications, 15 patents and patent applications, and over 40 grantts and 80 contracted works outsourced from industry. She cooperate with polish and europen industry of nonferrous metals as a specialist in material engineering and processing of copper and aluminum as well as aluminum alloys and copper alloys for electrical applications and studies of their operational properties (creep, stress relaxation, fatigue strength, thermal resistance etc.).
Taiwo E. Abioye completed his PhD from University of Nottingham, UK and undergone his post-doctoral study at Universiti Sains Malaysia, Penang, Malaysia. He is currently a Senior Lecturer in the Department of Industrial and Production Engineering, Federal University of Technology Akure, Nigeria. His research areas include laser materials processing, welding/joining technologies, additive manufacturing, materials characterisation and testing. He has publsihed more than 30 papers in reputed journals and has been a regular reviewer to many reputed journals.
SHIN-YA KITAMURA has graduated from Tohoku University, Japan and granted Dr. Eng. From Kyushu Univeristy, Japan. He worked in Nippon Steel Corp., for 25 years as a researcher of steelmaking field. Now, he is a profrssor of the Institute of Multidisciplinary Research for Advanced Materials, Tohoku University. He has published more than 100 papers in reputed journals and has been serving as an editorial-in-chief of Journal of Sustainable Metallurgy.
Prof. Ashish Kumar is presently heading chemistry
department in School of Civil and School of
Mechanical Engineering. He has been a
member of review boards of various journals
of Springer, Bentham, Taylor and Francis etc
and conferences in India and abroad. He has
also authored and reviewed diverse chapters
in refereed books with Springer nature and
Elsevier, Wiley etc. He is editor/Editorial
Board member of more than 15 international
Journals. He also published one book on
Engineering chemistry. He also evaluated
Ph.D thesis’s from India and Abroad. He
himself guided more than 20 (Ph.D / Masters
and UG) students. He was recipient of
Research Excellence Award from LPU for
last three consecutive years.
Xi'an University of Architecture and Technology China
H. Puga has completed his PhD from University of Minho, Portugal. He is an Assistant Researcher and coordinator of two funded projects in the melt treatment assisted by ultrasound. He is the author/co-author of 55 journal papers and has more than 40 contributions in international conferences.
This study was co-financed by the European Regional Development Fund (ERDF), through the Operational Programme for Competitiveness and Internationalization (COMPETE 2020), under Portugal 2020, and by the National Agency for Science and Technology (FCT), through national funds in the scope of the project:Ref. n.º 030967 de IC&DT – AAC n.º 02/SAICT/2017 e POCI-0145-FEDER-030967
National University of Science and Technology Russia
Voiculescu Ionelia is a full professor at University Politehnica of Bucharest, starting from 2005. The main research fields are mechanical testing, microstructural characterization, welding. Together with the team, she has obtained a many types of new materials from the High Entropy Alloys family. Now she is working under a research contracts to study the behavior of high entropy alloys (to dynamic impact), methods for joining, obtaining of new corrosion resistant biomaterials. She is reviewer for 5 international ISI quoted journals.
Sun-Joong KIM has completed his PhD from Tohoku University, Japan and was Assistant professor in Tohoku Unversity, Japan. He is Assistant professor in Chosun University, Korea. He has published more than 25 peer reviewed papers in reputed journals and has been serving as an editorial board member of Korean Institute of Resources recycling.
Prof., Dr. Sci., PhD Natalia Vladimirovna Kamanina – Leader of the team, Head of the
Laboratory for Photophysics of media with nanoobjects at Vavilov State Optical Institute. She
coordinates the job of the team, participate at all experiments and analyze the data. She has
current interest in the areas of investigations on inorganic and organic materials operated in the
UV and IR range, innovative nanostructured coatings, metals, semiconductors, fullerenes,
biological objects, laser-matter interaction. She is Federal Russian expert in scientific-technical
area. In parallel of her scientific activity, she has been lecturing from 2002. She is a Professor of
the St. Petersburg Electrotechnical University “LETI” (2002-present). She was a superviser of 5
PhD-researches, which succesfully defended their PhD-thesis. Author ID: 55980751700.
George Vander Voort, principal of Vander Voort Consulting LLC and consultant to Struers inc., is a graduate of Drexel and Lehigh Universities. Drexel presented George with the Distinguished Alumnus Award in 2005 and the Service to the Profession Award in 2016. He had 29 years’ experience in the steel industry. A past president of the International Metallographic Society and past chairman of ASTM Committee E-4 on Metallography, George has over 447 publications, 6 patents, 451 lectures in 42 countries, a video course, and 8 ASTM standards. He has taught 281 seminars and courses and has received 36 awards in metallography contests. He was a trustee for ASM International and is on the editorial boards of Praktische Metallographie/Practical Metallography; Metallography, Microstructure and Analysis; Image Analysis and Stereology; and, the International Journal of Microstructure and Materials Properties. He is a Fellow of ASTM International, ASM International and the International Federation of Heat Treatment and Surface Engineers. He is a Fellow and Honorary Life Member of Alpha Sigma Mu metallurgy and materials science honorary society and an honorary member of the Polish Society for Stereology.
Name : Dr. Munish Pandey
Organization : K.M.Agrawal College of Arts, Com.,& Sci. Kalyan,Thane,Maharastra(‘A’ grade by NAAC)
Department : Physics
Designation : Assistant professor
Date of Birth : 15/04/1970
Address : 004/8, Chanakya Nagar,
Umbarde road, Adharwadi, Kalyan(W).
Contact no : 09820482170
Email id : email@example.com
Educational Qualification : M.Sc , Ph.D
Other Qualification :
Certificate Course in Computer Programming (CCP)
Maharashtra State Board of Vocational Examination
Project Assistant (1993-94) : 01 year Dept. of Physics, University of Mumbai. 1993-1994
Under graduate (1994-) : 24years
K.M.Agrawal College, Kalyan.
Post graduate : Ten years
Recognized Teacher of the Universities
1) M.Sc Degree in Physics by Papers, Mumbai University, MUMBAI.
2) M.Sc Degree in Physics by Research, Mumbai University, MUMBAI.
3) M.Phill Degree in Physics , Madurai Kamraj University, Madurai. MUMBAI.
4) M.Phill Degree in Information Technology YCMOU, NASHIK.
5) Ph.D. Degree in Physics JJT University, Rajasthani Seva Sangh , RAJASTHAN.
6) Ph.D. Degree in Physics, Mumbai University, MUMBAI.
Research Experience (10 years)
a) Minor Project 04 Mumbai University,K.M.A.College…. Appendix-III
b) M.Phil (Completed students) 03 Physics ,Madurai Kamraj University.
01 Information Technology,YCMOU, Nashik
c) Ph.D. (Current students) 03 Physics ,Mumbai University…………. Appendix-IV
d) Paper published (Appendix-I) 04 Journal
02 ISBN No. 01 communicated
04 Online Journal
e)Paper Presented 01 Inter National Symposium 06 National Seminar/conference
02 State seminar ……………… (Appendix-II)
Seminar 04 National 01 State 02 University/college
Conference 01 International 03 National 01 State
Workshop 22 University/college/others
Symposium 01 DAE 01 National ……….. Appendix-I
BOOKS : …………………………………………………………………………….Appendix-V
EX-Vice Principal (science)
EX-Member Local Management Committee, K.M.Agrawal College
Head Department of Physics
Ex-COORDINATOR Information Technology & Computer Science Department
EX-Chairman Information Technology and Computer Science Department
EX-Member Science Association,, Sports Committee, Discipline Committee, etc.
Subject Expert Selection for Assistant Professor (University Panel)
EX-Member Board Of Studies in the subject of Physics (5yrs)
EX-Member 32(5)(a) of The Maharashtra University Act for 5yrs
Member Tagya Committee for college/course Recognition
(university of Mumbai)
Member Committee for Research Lab Recognition (M.Phil and Ph.D.)
(university of Mumbai)
Subject Expert V.C. Nominee for Physics and Information Technology.
Exam Paper Setter, Moderator and Examiner(B.Sc.,M.Sc.,Ph.D.)
Life Member Indian Association of Physics (Gen/LM/12027)
Life Member Physics Academy of North East (Sr.No.144)
EX-Member Board of Studies (Physics) ,University of Mumbai.
Life Member Society for Materials Chemistry ( LM-321),BARC
Life Member Material Research Society of India, BARC (LMB-1549)
Life Member Amateur Association of Astronomers, Mumbai
1. Joined college in the year 1994 Physics Department with F.Y.BSc. and S.Y.BSc.
2. Completed Ph.D. in service (Dec 2003)
3. Started T.Y.BSc. in the year 2005
4. Started M.Sc. in the year 2011
5. Recognized Department of physics Lab as center for Ph.D. in the year 2014
6. Faculty improvement program:
01 Orientation Course, Mumbai University
03 Refresher course Mumbai, Goa & Gauhati University
01 Short Term Program Chandigarh University
7. Instrumental in getting new course of Information Technology and Computer Science(2005)
8. Organizer member for sports championship at state level:
A) ARCHERY CHAMPIONSHIP
b) SOFT BALL CHAMPIONSHIP
c) TEAKWANDO CHMPIONSHIP
d) KORF BALL CHMPIONSHIP
9. Guest lecturer and Science exhibition Judge at various nearby schools
10. Invited speaker and session chaired at National seminars
Seminar/ Workshop/ Conference
sr topic place Conference/workshop
1 Liquid crystals University of mumbai International Conference 5th to 8th dec 2006
2 exploration DANGS, Gujarat tourism Trekking 26-29/10/2006
3 Emerging alternative vision of knowledge revolution Mumbai university Seminar on national knowledge commission report 14/sep/2007
4 physics Mumbai university Refresher course( A-grade) 18/10/2007 to 8/11/2007
5 Revised syllabus of f.y.b.sc D.G.Ruparel,mumbai /workshop 26/july2008
6 OPTICAL SPECTROSCOPY WRIC MUMBAI WORK SHOP 5-9/01/2009
physics Goa University Refresher course( A-grade) 30/03/2009 to 19/04/2009
7 Revised syllabus of S.y.b.sc R.JHUNJHUNWALA COLLEGE WORKSHOP 11/7/2009
9 Revised syllabus of T.y.b.sc(PRACT) B.N.BANDODKAR WORKSHOP 7/8/2010
10 Revised syllabus of T.y.b.sc(THEO) V.G.VAZE WORKSHOP 31/7/2010
11 ROLE AND FUNCTION OF UNION IN 21ST CENTURY MUMBAI UNIVERSITY WORKSHOP 19/6/2010
12 COSMOLOGY XAVIER COLLEGE WORKSHOP 25-26/10/10
13 MICRO PROCESSOR&CONTROLER SOMAIYA WORKSHOP 6/12/10
15 IMPACT OF URBANISATION K.M.AGRAWAL COLLEGE SEMINAR(NATIONAL) 24-25/01/2011
16 OPPORTUNITY IN INFORMATION TECHNOLOGY VIKASH COLLEGE SEMINAR(STATE) 22/01/2011
17 RECENT TRENDS IN MATERIALS BIRLA COLLEGE national Conference 29-30/01/2011
18 CREDIT BASEED GRADING SYSTEM FYBSC V.G.VAZE WORKSHOP 20/6/2011
19 EMBADED SYSTEM KHALSA COLLEGE WORKSHOP 28-29/11/11
20 EXPLORING BASIC PHYSICS RD NATIONAL SEMINAR 28/1/2012
21 CBSC FOR SYBSC RD NATIONAL SEMINAR 23/6/2012
22 Revised Syllabus TYBSC V.G.VAZE WORKSHOP 22/2/2013
23 Modern….polymer S&T ICT MATUNGA WORKSHOP 3-4/4/2013
24 IPR&CYBER LAW Ves COLLEGE WORKSHOP 30/01/2014
25 Revised syllabus of FYBSC Vaze college WORKSHOP 9/04/2015
26 Role of Best practice…HEInstitution CKT college IQAC SEMINAR(NATIONAL 24-25 /04 /2015
27 Green chemistry National college WORKSHOP 6/12/15
28 Bharat shksha Ratan Award GSHEG,Delhi seminar 15/2/2016
29 RACBS(session coordinator) K.M.Agrawal college National Conference 26-27/2/2016
30 LEARNING MOODLE K.M.Agrawal college WORKSHO[P 29/4/2017
31 Revised syllabus of SYBSC DG Ruparal college WORKSHOP 5/7/2016
32 Revised syllabus of SYBSC SIWS WORKSHOP 21/6/2017
33 Revised syllabus of FYBSC
34 Revised syllabus of FYBSC
35 PLASMA MATERIAL ICT WORKSHOP 21/9/2016
CHALLENG……POLICY BUCTU WORKSHOP 18/6/3016
37 RTSMT BIRLA SEMINAR 2/7/2016
38 MAKE……REALITY KMA INTER –N CONFERENCE 23/01/2017
39 RTBN BIRLA National Conference 29/3/2017
40 REVISED TYBSC JHUNJHUNWALA WORKSHOP 19/6/2017
41 REVISED SYBSC JAI HIND WORKSHOP 7/7/2017
42 REVISED SYBSC GURUNANAK WORKSHOP 10/10/2017
43 SKIL KMA CONFERENCE 3/3/2018
Appendix-II (PAPER PUBLISHED)
1. Pandey Munish , R.P.Singh, G.C Jha & L.K.Mishra,.An Evaluation of K dependence longitudinal & transverse dielectric function in the RPA & HD approximation., ACTA CINCIA INDICA P-353 VOL XXXI P 2005 No-3.
2. Pandey Munish , R.P.Singh, G.C Jha & L.K.Mishra,. An Evaluation of Surface Red(w) & Y(w)as a function of (w/wp) for metals., ACTA CINCIA INDICA P-459 VOL XXXI P 2005 No-4.
3. Sarla Dawara & Munish Pandey,. Synthesis , Chracterisation & D.C.conductivity studies of polypyrrole-tio2 Composites, ACTA CINCIA INDICA P-459 VOL XXXVII P-2,133(2011).
4.Preeti Sarode,Munish Pandey., Development of M- Commerce and Urbanization, Impact of Urbanization,ISBN:978-81-8465-862-0,p255-260, 2011.
5. Preeti Sarode,Munish Pandey,. Open Sourse Software For Information Technology Students., Proceeding of State level seminar on EmergingTreands And Opportunities in Information Technology, p 56-59 2011.
6.Dr.S.S.Patil,Munish Pandey, Impact of Urbanization on nature/climate, Impact of Urbanization,ISBN:978-81-8465-862-0,p109-114, 2011.
7. S.S.Patil,Munish Pandey,D.C.Kothari .Effect of Ion implantation and Ion beam mixing on corrosion resistance of material ,RTMR-11,,p43,jan 2011.
8. Dipti Khandare,Munish Pandey . Synthesis and Structural properties of conducting Polypyrrole- Nano Zro2 composite ,Proceeding of State level seminar on Synthesis and Characterization of Nano Materials ,p16,2012
9. Munish Pandey .”Synthesis and Surface study of polypyrrole copolymer using polystyrene”, Proceeding of National level seminar on Explore Physics ,p22-25,2013
10. Munish Pandey,Rich Badlani,Bhagyshree Patiai .”Synthesis and Characterization of Enzyme doped polypyrrole material” ,Proceeding of National level seminar on Explore Physics ,p68-71,2013
12. Munish Pandey .”Polypyrrole-Zro2 composite: XRD and DC conductivity study for doping”, Proceeding of National level seminar on EmergingTreands in Physical Sciences ,p53-58,2015 ISBN 978-93-5212-614-9
13. Munish Pandey, B.M. Bhangale,,M.M. Khandpeker, Effect of Temperature on Dielectric constant and Electrical Conductivity of Pure and Urea Added KDP , Invertis Journal of Science and Technology, Vol. 9, No. 1, 2016 ; pp. 30-35, ISSN 0973-8940 Online : ISSN 2454-762X
14.Munish Pandey, Preeti Sarode , ”A Study Of 3G,4G And 5G Technology Of Wireless Communication System” GLOBEL RESEARCH THOUGHTS ISSN 2231-5063,JAN 2017
15.Munish Pandey, , ”EMPLOYABILTY AND SKILL DEVELOPMENT FOR PHYSICS STUDENTS FOR JOB PERSPECTIVE” REVIEW OF RESEARCH ISSN:2249-894X,MARCH 2018
16. Munish Pandey and Richa Badlani,” SYNTHESIS AND STUDY OF NOVEL PAPAIN -POLYPYRROLE COMPOSITE” International Journal of Recent Scientific Research Vol. 10, Issue, 03(C), pp. 31331-31333, March, 2019 Impact Factor 2017: 7.383, UGC JOURNAL NO:46629
17. Munish Pandey, Richa Badlani, INVESTIGATION OF ANTIBACTERIAL ACTIVITY OF PAPAIN DOPED POLYPYRROLE AGAINS GRAM POSITIVE AND GRAM NEGATIVE BACTERIA communicated to Invertis Journal of Science and Technology,
LIST OF PAPER PRESENTED
SR NO. TITLE PLACE SEMINAR DATE
1. OPEN…….STUDENTS VIKASH COLLEGE STATE 22/01/2011
2. DEVELOPMENT………URBANISATION KMA NATIONAL 24/01/2011
3. IMPACT……….CLIMET KMA NATIONAL 24/01/2011
4. PROPERTIES ……..COMPOSITE VIKASH STATE 11/2/2012
5. SYNTHESIS………POLYSTERENE CKT NATIONAL 23/12/2013
6. SYNTHESIS………PPY CKT NATIONAL 23/12/2013
7. Polypyrrole-Zro2………..DOPING MEHTA NATIONAL 23/01/2015
8. STUDY……………..MATERIAL HALDIA NATIONAL 9/10/2015
9. EFFECT…….KDP ANNA UNIV INTERNATIONAL 2/2015
10 A STUDY………………….SYSTEM KMA INTERNATIONAL 22/2/2016
11. ROLE……..INDIA KMA INTERNATIONAL 23/2/2017
12 SURFCE STUDY OF ENZYME DOPE ….PPY BIRLA NATIONAL 29/3/2017
13 EMPLOYBILITY……….JOB KMA INTERNATIONAL 3/2018
3) RESEARCH PROJECT
1.“Ceramic Polymer Material Synthesis And C”
Project No. 91, Mumbai University, Ref.No. APD/237/ 129 of 2010 at 14th Jan 2010
2. .“Synthesis & Characterization of co-polymer using polypyrroe as one of polymer material”
Project No. 24, Mumbai University, Ref.No. APD/237/321/2012 dated 17 nov 2012.
2.study of electrical characterization of enzyme doped polymer. KMA/MRP/T/2018/001
4. SYNTHSIS AND CHARACTERISATION OF PLANT EXTRAT DOPED KDP CRYSTAL,MU APD/237/601 OF DATED 22.3.2019
RESEARCH GUIDE FOR M.Phil
a) STUDENT: Dipti Khandare
UNIVERSITY: Madurai Kamraj University 2008(PHYSICS)
TOPIC: “synthesis & Characteriation of ceramic polymer”A7A6724501
b) STUDENT: Bharit M. Bhangale
UNIVERSITY: Madurai Kamraj University 2009(PHYSICS)
TOPIC: “Study of KDP single crystal added with same Organic Compound”A7A6724502
c) STUDENT: Sarla H.Dawara
UNIVERSITY: Madurai Kamraj University 2009(PHYSICS)
TOPIC: “A study of ceramic polymer & it’s characterisation”A7A6723614.
d) STUDENT: Preeti Sarode
UNIVERSITY: Yashwantrao Chavan Maharashtra Open University, Nashik
2010 I.T.(Information Technology )
TOPIC: A study of Computer Science & Information Technology students-
approach towards open source software under Mumbai
RESEARCH GUIDE FOR Ph.D(cntd.)
a) STUDENT: Ms. NamrataAjwani
UNIVERSITY: Mumbai University 2015(PHYSICS)
TOPIC: “SYNTHESIS AND CHARACTERIZATION OF CERAMIC DOPED COPOLYMER MATERIAL”
b) STUDENT: Mr. Dinesh Himatsinghani
UNIVERSITY: : Mumbai University 2015(PHYSICS)
TOPIC: ““SYNTHESIS AND STUDIES ON NANOCOMPOSITE OF POLYPYRROLE-CERAMIC COMPOSITES”
c) STUDENT: Mrs Sarla H.Dawara
UNIVERSITY: Mumbai University 2015(PHYSICS)
TOPIC: “A study of ceramic polymer & it’s characterisation”A7A6723614.
BOOK PUBLISHED UNDER MUMBAI UNIVERSITY FOR FYBSC AND SYBSC STUDENTS (SEM-1,2,3,4)(TECH_MAX Publication)
Sr.no. Title ISBN NO AUTHORS SEM/DATE
1. CLASSICAL PHYSICS(PHYSICS -1) 978-93-5077-027-6 Dr.Munish Pandey,satyajit s Kamble Sem-I(2016-17
2. Mechanics and Thermodynamics(PHYSICS -1) 987-93-5077-079-5 Namarata R Ajwani, Dr.Munish Pandey,Dinesh B Himatsinghani Sem-III(2017-18)
3. Vector Calculas,Analog Electronics(PHYSICS -I1) 987-93-5077-080-1 J.S.Katre,Namarata R Ajwani, Dr.Munish Pandey,Dinesh B Himatsinghani Sem-III(2017-18)
4. Applied Physics-I(PHYSICS -II1) 987-93-5077-081-8 Namarata R Ajwani, Dr.Munish Pandey, Dinesh B Himatsinghani Sem-III(2017-18)
5. Mathematical Physics(PHYSICS -1) 978-93-87523-78-4 Dr.Munish Pandey,Dr.Gitesh G.Padhye Sem-II(2016-17
6. Optics and digital ElectronicsPHYSICS -I)and
Quantum Physics(PHYSICS -II)and 978-93-87656-24-6 J.S.Katre, Dr.Munish Pandey,Dr.Ravindra H. Upadhyyay Dr.Mahendra M Khandpeker Sem-IV(2017-18)
7. Applied Physics-II(PHYSICS -II1) 978-93-876523-65-4
J.S.Katre,HarishG.Narula Dr.Munish Pandey, Dr.Pushpender G.Bhatia Sem-IV(2017-18)
CHAMPIONSHIP ORGANISED IN SPORTS:
MAHARASTRA STATE ARCHERY CHMPIONSHIP SACRED HEART SCHOOL KALYAN CHAMPIONSHIP 26-27/12/2009 MAHARASTRA STATE ARCHERY CHMPIONSHIP
TAEKWONDO CHMPIONSHIP K.M.AGRAWAL COLLEGE CHMPIONSHIP 15/01/2011 TAEKWONDO CHMPIONSHIP
Korfball Championship Maxi Ground official 18-20 feb 2011 15th sr.state championship
Exploration DANGS, Gujarat tourism Trekking 26-29/10/2006 exploration
1. CREDIT BASEED GRADING SYSTEM FYBSC V.G.VAZE WORKS-HOP 20/6/2011
2. CREDIT BASEED GRADING SYSTEM SYBSC RD national college workshop 23/6/2012
3. Nanoscience and technology(INVITED TALK) Haldia institute of technology NATIONAL SEMINAR 9-10/102015
4. RACBS(SESSION COORDINATOR) KMA NATIONAL 26/2/2016
INVITED TALK AT NATIONAL SEMINAR Nano science and Nano Technology”
TOPIC: “Study of DC conductivity of urease doped polypyrrole Material”
PLACE: Haldia institute of technology,Haldia, W.B.(9-10/10/2015)
AWARD- BHARAT SHIKSHA RATAN – G.S.H.E.G.,NATIONAL DELHI,INDIA.
I finished Materials Science at University of Technology and Life sciences in Bydgoszcz, Poland in 2016.
Work experience: IX2016-V 2017 Skoda Auto Mlada Boleslav Czech Republic - Press shop - control of materials, especially steel and plastics V 2017- XII 2018 Skoda Museum - expert of automobilism XII 2018- IX 2019- Expert for materials as a free lancer IX2019- now Organic Di sposables - innovator, preparing of composites.
Dr. Abdeen Mustafa Omer (BSc, MSc, PhD) is an Associate Researcher at Energy Research
Institute (ERI). He obtained both his PhD degree in the Built Environment and Master of
Philosophy degree in Renewable Energy Technologies from the University of Nottingham. He is
qualified Mechanical Engineer with a proven track record within the water industry and renewable
energy technologies. He has been graduated from University of El Menoufia, Egypt, BSc in
Mechanical Engineering. His previous experience involved being a member of the research team at
the National Council for Research/Energy Research Institute in Sudan and working director of
research and development for National Water Equipment Manufacturing Co. Ltd., Sudan. He has
been listed in the book WHO’S WHO in the World 2005, 2006, 2007 and 2010. He has published
over 300 papers in peer-reviewed journals, 200 review articles, 17 books and 150 chapters in books.
PhD student Norman Toro Villarroel of the Polytechnic University of Cartagena, Murcia, Spain and graduated in MS in 2019 at Universidad Católica del Norte, Antofagasta, Chile. Currently I work as an academic being head of a research laboratory called "new lines of research", where work is done in the leaching, flotation and rheology lines. At the moment with 9 articles in ISI journals and 2 in SCOPUS.
Enrico Gianfranco Campari has completed his PhD from Bologna University, Italy and postdoctoral studies from LLB, Paris, France. He is associate professor at the Physics and Astronomy Department of Bologna University. He has published more than 40 papers in reputed journals and is inventor in 12 patents.
Federal University of Santa Catarina (UFSC) Brazil
Maurï¿½cio Goraiebe Pollachini has completed his graduation in Materials Engineering from
Federal University of Santa Catarina (UFSC), Brazil and is finishing a MBA in Business
Administration from Getï¿½lio Vargas Foundation (FGV). He has industrial, administration and
laboratory experiences in companys from Brazil and it is his first paper as a co-author.
M.A. Hayatu has completed his B.ENG Metallurigical and materials Engineering at Ahmadu bello university,Zaria at the age of 26 in 2012.He then joined Jigawa state polytechnic as Assistant Lecturer in welding and fabrication department.He currently teaches welding metallurgy,theory and practical metallography,iron and steel making and other engineering courses.He is the Examination officer in the Welding and fabrication department.He attended and presented conferences/conference papers within Nigeria.Currently he is running Masterï¿½s degree programme in metallurgical and materials engineering at Ahmadu Bello university,Zaria,Nigeria.His research area is welding engineering.His is working under the supervision of Professor E.T.Dauda and Professor O.Apobiede.